01
Check
Confirm the appliance and fuel.
Before attendance, make, model and fuel type help us establish the likely installation requirements and engineer competency needed.
Bathrooms Appliances · Cooker & Hob Installations
A clean installation
starts before the connection.
Cooker and hob installation across the Cotswolds, coordinated around the appliance specification, fuel type, kitchen layout and safe access.
Natural GasLPGKitchen Appliances
The appliance has to suit the services
A new cooker or hob is not automatically a direct swap for the old one.
Gas type, appliance category, ventilation requirements, clearances, connection position and kitchen design all affect whether an installation can proceed safely and neatly.
We install suitable cooking appliances within the relevant engineer competencies and can coordinate the plumbing or gas work around wider kitchen installations.
Where electrical connection or modification is required, that element must be handled by an appropriately qualified electrical contractor.
02
Prepare
Make sure the location is suitable.
Accessible isolation, connection position, clearances and surrounding kitchen construction all need to support the appliance installation.
03
Connect
Install, test and leave it ready.
The appliance is connected and tested within the relevant scope, with the surrounding kitchen treated carefully throughout the work.
The detail
Cooker and hob installation may involve
01
Natural gas appliance connection where applicable
02
LPG appliance connection where applicable
03
Isolation and connection checks
04
Replacement of suitable existing appliances
05
New appliance connection during kitchen works
06
Coordination with cabinetry and worktops
07
Operational testing within service scope
08
Advice where the proposed appliance is not a direct replacement
The CCG approach
“In a new kitchen, the best appliance installation is the one that looks as though it was planned from the beginning.”
Good to know
Gas, LPG and other services
Cooking appliances can require different trades. We handle the plumbing/gas scope applicable to our engineers and coordinate clearly where electrical work is also required.
Natural Gas
Suitable gas cookers and hobs require the relevant Gas Safe appliance competencies.
LPG
LPG cooking appliances require the appropriate LPG competency and correct appliance configuration.
Electrical element
Hard-wired electrical work or circuit alterations should be completed by an appropriately qualified electrician.
The CCG difference
Part of the kitchen team, not an afterthought.
Our relationship with Clarke Construction Group and its specialist divisions makes us comfortable working around cabinetry, worktops, appliances and other trades.
Specification awareness
We check the actual appliance rather than assuming a standard connection.
Kitchen protection
Finished surfaces and cabinetry are treated carefully.
Trade coordination
We understand when plumbing, gas, electrical or joinery work needs to happen in sequence.
Clear boundaries
If another qualified trade is needed, we tell you before the installation stalls.
From enquiry to completion
A straightforward process.
Clear communication from the first conversation through to finished work.
Send the appliance details
Provide make, model, fuel type and photos of the existing installation.
Confirm scope
We establish whether the appliance and connection work are suitable for our engineer.
Free quotation
For planned installations, we confirm the agreed work.
Install and test
The appliance is connected and checked within the relevant service scope.
Frequently asked questions
Cooker & Hob Installations.
Useful answers before you arrange the work.
Can you install a gas hob I have already purchased?+
Usually, if the appliance is suitable for the gas type, location and installation conditions and the work falls within the engineer’s relevant Gas Safe competencies.
Can you convert an appliance between natural gas and LPG?+
Only where the manufacturer permits conversion, the correct approved components are available and the work falls within the relevant engineer competency. This should never be assumed.
Do you connect electric cookers too?+
Electrical connection or circuit work should be completed by an appropriately qualified electrician. We can coordinate with CCG Electrical Services where appropriate.
Can you install a new hob into an existing worktop?+
The cut-out, clearances, appliance dimensions and worktop material all need to be suitable. Worktop alteration may require another trade.
Do you disconnect old appliances?+
Suitable disconnection can form part of an agreed replacement installation, subject to the appliance and fuel type.
Free quotation
Tell us what you need.
Whether you are planning a new heating system, dealing with a repair or simply need some advice, send us the details and our team will get back to you.
Prefer to speak to somebody?
01451 542084
Natural Gas
LPG
Oil
Free quotations